Maintenance DIY’s for the apartment

Maintenance DIY’s for the apartment

Top 5 DIY Home Skills You Should Know

One of the best parts about living in an apartment is that when something goes wrong (like the heat isn’t working or the toilet won’t stop running), you don’t really have to take care of it yourself– maintenance can help!

Top 5 DIY Skills You Should Know

But there are some DIY basics you should know how to do yourself. Sometimes maintenance may not be as quick as you’d like, or it may just be something you’d rather handle on your own. From fixes to decor, here are five easy DIY projects you should know how to do:

1. How to Unclog a Drain

Small plumbing inconveniences like a clogged drain or toilet can be frustrating, but the great news is they’re pretty easy to take care of on your own. Unclogging a sink requires just the tiniest bit of plumbing know-how, but it’s relatively simple.

Top 5 DIY Skills You Should Know - How to Unclog a Drain

First, remove the drain stopper by locating the pivot rod that’s holding it in place under your sink. The pivot rod should be stuck through the pipe and secured with a nut on the pipe near the bottom of the sink. Remove the nut and the rod, and the drain stopper should be easy to pull up and out.

Then, use a snake to clear the drain (you can buy these at any hardware store). Thread the snake as far as it will go into the drain– you want it to reach as deep into the P trap as it can go (that pipe that’s shaped like a U). Pull it out slowly, and repeat until you hook whatever’s clogging the pipes. Then, replace the drain stopper and pivot rod, and you’re finished!

Keep in mind that most landlords prohibit tenants from using products like Drano to clear clogs because they can damage pipes.

2. How to Change a Showerhead

​There’s nothing worse than a showerhead that makes taking a shower feel like you’re standing underneath a leaky faucet. But while showerheads can’t dictate water pressure, many can adjust the spray into something a little more bearable– and low-flow versions are better for the environment, too.

Top 5 DIY Skills You Should Know - How to Change a Showerhead

As far as easy DIY projects go, changing a showerhead is one of the simplest– just buy a new one and some Teflon tape (aka plumber’s tape).

Unscrew the old showerhead from its arm using an adjustable wrench or some pliers. You may have a fight on your hands if it’s old, but be careful not to apply too much pressure or squeeze too hard.

Once the old head is removed, clean the end of the pipe and wrap it in a new layer of Teflon tape to prevent leaks. Then, screw your new showerhead on over the tape, and voila! Good as new.

3. How to Hang Something Heavy

You should know one DIY skill in particular to hang something heavy: how to find a stud. Studs are strong enough to withstand heavy items like floating shelves or mirrors, many of which could damage drywall. One easy to way to find a stud is to use an electronic stud finder– just pick one up at the hardware store.

Top 5 DIY Skills You Should Know - How to Hang Something Heavy

You can also do it the old-fashioned way and simply knock on your walls– a hollow-sounding knock means no stud, while a solid-sounding knock means you’ve hit gold, so to speak. Remember that studs can always be found around windows, doors and in corners, and they’re located every 1.5 to 2 feet.

4. How to Patch a Hole in the Wall

If you hang a bunch of stuff in your apartment, patching the holes in your walls may be necessary when you move out to ensure you get your security deposit back. All you need to patch holes is some lightweight spackle, a putty knife and some sandpaper.

Top 5 DIY Skills You Should Know - How to Patch a Hole in the Wall

Simply use one corner of the putty knife to scoop out a small amount of spackle, and use it to fill the hole. Then use the straight edge of the putty knife to smooth and even out the spackle. Let it dry for a few hours (or overnight), then sand the area lightly with your sandpaper, blending the spackle into the surrounding drywall.

5. How to Fix Your Toilet

There are any number of toilet issues renters may want to learn how to fix themselves, but if there’s one you should know it’s how to fix a clog. If your toilet is clogged, it’s time to break out the plunger.

Top 5 DIY Skills You Should Know - How to Fix Your Toilet

First, place the plunger over the hole at the bottom of your toilet, making sure the rubber head is completely covered by water. If there isn’t enough water in the bowl, simply use a pitcher to add some more. Then, pump the handle into the head a few times and pull the plunger up sharply, breaking the seal. The power of suction should do the trick.